Hardware:

2011/02/04
debouncing problems of button
少なくとも、100nFのコンデンサが必要。
http://www.ikalogic.com/debouncing.php

2010/08/06
UHIのJTAGコネクタが壊れ易い(5個のうち、2個壊れた)
対策未定

2010/08/06
UHIの書き込み失敗することが頻繁に起こしてた。
原因:クリップCableの問題、交換して直した。

2010/08/06
UHI加速度センサの方向が逆になった、アルゴリズム議論に不便だ。
新版発注する時に変更する。


Software:

2012/08/02
some high-level optimized code can not run in the wireless boot loader program.

2011/07/10
Motor can not work when using RF function on the CuteBox.
Resolved! P1_6, P1_7 are used as test pins for RF signal.
The motor is controlled using P1_2, P1_3, P1_4, P1_5


2010/07/25
Error[e46]: Undefined external "tilt_analysis" referred in testAccel_main.
Resolved! The tile_analysis.c should be added into the project.

2010/07/23
About the setting of the development environment
To tell the prepocessor the directory of the headfiles,
$PROJ_DIR$\..\LIBRARY\UTIL\INCLUDE
It seems can not work correctly.
Resolved! The above setting command is OK.
But the source file (.c) need to be removed and added into the project once again!

2010/07/11
hal_mpu_DMA.h
This makes sure the bitfields members go from the most to least significant bit (MSB to LSB)
#pragma bitfields=reversed
...........
There is no longer need for the bitfields to be reversed, so they are set back to default here.
#pragma bitfields=default
DefaultではMSBか、LSBと思った。


2010/05/31
CuteBox1.0/TestLedKey/TestLedKey_main.c
Sentence of "if(temp%2)" is wrong.
Please write "if((temp%2) == 1)" or "if((temp%2) == 0)".
What's problem? Now, I don't know.
(s1150235 Kaoru Yamagisi)